How to fix an iPhone stuck in an Apple logo loop after an update
Industrial Hypertext · November 2026
After an iOS update, our iPhone 11 showed the Apple logo, went black and started again. We watched it repeat for about ten minutes. Once it flashed “Loading recovery options”, then went straight back into the loop.
We got it running again by choosing Update in Apple Devices on a Windows PC. Our apps and data were still there when we unlocked the phone. The recovery-mode button sequence below applies to iPhone 8 and later, including the second- and third-generation iPhone SE. Earlier models use different buttons. Find the recovery buttons for your iPhone.
1. Connect the iPhone to Apple Devices on Windows
Open the Microsoft Store, search for Apple Devices and install the app from Apple. Open it and connect the iPhone to the PC with a USB cable that supports data. We used a Lightning cable for the iPhone 11. Apple Devices installation guide.
2. Hold the side button until the recovery screen appears
With the iPhone connected, do these three things in order.
- Quickly press and release Volume Up.
- Quickly press and release Volume Down.
- Hold the side button. Keep holding when the Apple logo appears. Release it when the screen shows a cable pointing towards a computer.
3. Choose Update in Apple Devices
When the PC offers Update and Restore, choose Update first. It attempts to reinstall iOS while keeping your data. Restore erases the iPhone. If Update fails, record the error code and check whether you have a backup before deciding how to proceed. Apple’s guidance on reinstalling iOS.
Our download was about 10 GB, and the first estimate was 27 minutes. If the download takes more than 15 minutes, the iPhone may leave recovery mode. Let the PC finish downloading, then repeat the button sequence and choose Update again if prompted.
4. Leave the iPhone connected until the lock screen appears
On our PC, Apple Devices showed Extracting Software, Preparing iPhone for Software Update and Verifying Updated iPhone Software. Windows played its USB connection sounds as the phone restarted. Even after the app said the update had finished, the phone displayed a second progress bar under the Apple logo.
We left the cable plugged in and let that bar finish. The lock screen appeared, we entered our passcode, and our apps and data were there. You can check the installed iOS version under Settings → General → About.
While the phone is still connected, you can make a backup. Follow any Trust prompts, select the iPhone in Apple Devices, open General and choose Back Up Now. Apple’s Windows backup guide.
Related guide: Troubleshooting Optus Daily Roaming overseas.